Dell PowerVault 735N Руководство по установке - Страница 16

Просмотреть онлайн или скачать pdf Руководство по установке для Хранение Dell PowerVault 735N. Dell PowerVault 735N 26 страниц. Nas appliances. boot hard-disk drive
Также для Dell PowerVault 735N: Дополнительное руководство (3 страниц), Руководство по замене оборудования (10 страниц), Руководство по обновлению (10 страниц), Руководство (18 страниц), Руководство по обновлению (12 страниц), Руководство по обновлению (8 страниц), Инструкции по замене Руководство (19 страниц)

Dell PowerVault 735N Руководство по установке
1-8
Rack Installation Guide

Installing the Slide Assemblies in the Rack

NOTE: If the slide assemblies were preinstalled by Dell, you can skip this section.
You must allow 2 U (3.5 inches) of vertical space for each system you install in the
rack.
NOTE: The vertical rails of the rack are marked by small indentations in 1-U
increments (see Figure 1-6).
1 U (1.75 inches)
Figure 1-6. One Rack Unit
For more information about requirements for installing components in a Dell rack, see
the Dell Rack Advisor software available on the Dell Web site at
http://support.dell.com.
CAUTION: If you are installing more than one system, install the slide
assemblies so that the first system is installed in the lowest available posi-
tion in the rack.
To install the slide assemblies in the rack, perform the following steps:
1.
Place the front of the template on the vertical rails at the front of the rack where
you want to install the system.
Ensure that the printing on the template identifies the side facing outward as the
template front.