Dell PowerVault DX6112 Руководство пользователя - Страница 32

Просмотреть онлайн или скачать pdf Руководство пользователя для Хранение Dell PowerVault DX6112. Dell PowerVault DX6112 39 страниц. Dx object storage platform
Также для Dell PowerVault DX6112: Руководство по началу работы (9 страниц), Руководство по началу работы (10 страниц), Руководство (10 страниц), Руководство (37 страниц), Примечание к выпуску (16 страниц), Руководство (12 страниц), Руководство (24 страниц), Руководство (23 страниц)

Печатать страницу
Dell PowerVault DX6112 Руководство пользователя

Two Disk Failure

If two physical disks fail, the RAID 5 group must be reconfigured and the operating system must be reinstalled.

Detecting And Monitoring Disk Failures

To optimize the protection of the RAID group on the system, you must detect hard drive failures immediately. Replacing
failed disks immediately reduces the risk of unplanned downtime and loss of critical data. Ensure that you replace the
failed disk with a new disk of the same capacity. If you use drives of greater capacity, some usable disk space is lost in
the RAID 5 configuration.
You can use the following methods to monitor the health of the disks:
•
Hard drive LED indicators — Monitors the drive activity and reports failures. For more information, see the
Owner's Manual at dell.com/support/manuals.
system's
•
Dell OpenManage Server Administrator — Monitors the health of the disks.
•
Dell Management Console — Centrally monitors the status of Dell systems. For more information about installing
and using DMC, see the

Storage Node Hard Drive LED Behavior

The following table displays the hard drive LED behavior for the DX6004S and DX6012S generation of DX Storage Nodes,
and the DX6104-SN and DX6112-SN generation.
Table 2. Hard Drive LED Behavior on DX6004S, DX6012S, DX6104-SN, and DX6112-SN Systems
System State
Power-on
BIOS initialization
PXE boot
CAStor loaded and running
Drive identify operation
Post-Drive identify operation
(identify light turned off)
Hot Swap/Bus Reset

Reinstalling The Operating System

The operating system is preinstalled on the DX Cluster Services Node. After a multiple disk failure of the system's RAID
group:
1.
Reinstall the operating system.
2.
Replace the failed hard drives.
3.
Run the RM Utility.
32
Dell Management Console User's Guide at dell.com/support/manuals.
DX6004S and DX6012S
Off
Off
Off
Off
Blink
Off
Off
DX6104-SN and DX6112-SN
Off
On
On
On
Blink
Off
On