Appendix A—Upgrading DX System Software
From Version 1 To Version 2
Guidelines
•
A direct upgrade of a DX system is not supported. For example, to upgrade from version 1 to version 3, first
upgrade to version 2, and then to version 3.
•
Perform the upgrade during off-peak hours to ensure DX Storage and DX Content Router activities are not
disrupted, since the CSN will not be functional during the upgrade and must be restarted after the software
update.
•
You cannot cancel an upgrade mid-process (using <Ctrl> <C>).
•
If an upgrade is interrupted due to a network or hardware outage, use the csn-reset functionality to restore
the previous software version, and then attempt the upgrade again. This requires backing up the appropriate
information as detailed in these instructions. Ensure that appropriate backups are made.
NOTE: If csn-reset followed by a reinstall is not successful, contact Dell Support. For more information,
see
Contacting
To upgrade a DX system from version 1.0 to version 2.
•
Upgrade RHEL 5.3 to RHEL 5.5. For more information, see
•
Upgrade the DX version 1.0 software to version 2.
Version 1.0 To Version
Upgrading RHEL 5.3 To RHEL 5.5
To upgrade the CSN's operating system to RHEL 5.5 from a previous version:
1.
In a terminal window, type uname –a and press <Enter>.
The release of the current kernel is displayed.
2.
In the same terminal window, type cat /etc/redhat-release and press <Enter>.
The current Red Hat release number is displayed.
3.
Insert the RHEL 5.5 DVD. Follow these steps if the system auto-mounts the RHEL 5.5 media DVD:
a) Verify if the /media/dvd directory exists. If not, create the directory.
b) In the same terminal window, type mount --move /media/RHEL_x.x\ x86_64\ DVD /
media/dvd and press <Enter>.
NOTE: Replace
For more information, see "Creating a Local YUM Repository on the DX6000 System" in the DX6000 User's Guide at
dell.com/support/manuals.
4.
In the same terminal window, type yum repolist and press <Enter>.
5.
In the same terminal window, type yum update and press <Enter>.
6.
After update is finished, type uname –a
The current kernel release is displayed which is different from the previous release.
Dell.
x :
2.x.
x.x with the appropriate RHEL version number.
Upgrading RHEL 5.3 To RHEL
x . For more information, see
5.5.
Upgrading DX Software From
8
35
Печатать страницу