EarthLinked PHXTI-130 Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Промышленное оборудование EarthLinked PHXTI-130. EarthLinked PHXTI-130 12 страниц. Pool heat exchangers
Печатать страницу1. Pre-Installation
Upon receipt of the swimming pool heat exchanger, check the model number against the bill of
lading.
The Earthlinked Technologies model numbers are as follows:
This heat exchanger is approved for use with swimming pool heat pump heating systems using
R-410A, R-407C or R-22 refrigerants.
This swimming pool heat exchanger is sold as a system component, and must be sized and
properly matched to other system components to provide the anticipated performance and safe
operation of the system.
2. Installation
The heat exchanger is designed to be used as a replacement component in an existing swimming
pool heat pump heating system, or as a component of a new swimming pool heat pump heating
system.
The overall dimensions of the heat exchanger are illustrated in Figure1. The heat exchanger must
be mounted on a level, hard surface and oriented in the direction shown in Figure 1 (vertically, with
connections on the top) to perform properly.
PHXTI-IM (05/13)
Model Number
PHXTI-90
PHXTI-115
PHXTI-130
Rating, BTU/HR
90,000
115,000
130,000
Page 3