Dell PowerVault MD1200 Техническое руководство - Страница 11
Просмотреть онлайн или скачать pdf Техническое руководство для Хранение Dell PowerVault MD1200. Dell PowerVault MD1200 23 страницы. Dell powervault storage enclosure setting up
Также для Dell PowerVault MD1200: Руководство по обновлению (32 страниц), Инструкции по установке стоек (2 страниц), Настройка (2 страниц)
Печатать страницу
Table 6.
FRONT PANEL / BEZEL INDICATOR AND FETAURE DESCRIPTION
Item
Indicator, Button, or
Connector
1
Enclosure status LED
2
Power LED
3
Split Mode LED
4
System Identification Button
Hard Drives
5
Enclosure Mode Switch
6
Figure 4.
** Available in Q3 2010
MD1200 and MD1220 Front Panel Feature Description
Icon
The enclosure status LED lights when the enclosure power is
on.
Lights blue during normal operation and when the host server is
identifying the enclosure.
Blinks blue when a host server is identifying the enclosure or
when the system identification button is pressed.
Lights amber when the enclosure is turned on or is reset.
Blinks amber when the enclosure is in the fault state.
The power LED lights when at least one power supply is
supplying power to the enclosure.
The split mode LED lights when the enclosure is in a split-mode
configuration. If the LED is not lit, it indicates that the enclosure
is in a unified-mode configuration.
The system identification button on the front control panel can be
used to locate a particular enclosure within a rack. When the
button is pushed, the system status indicators on the control
panel and the EMM blinks blue until the button is pushed again.
PowerVault™ MD1200—Up to 12 SAS hot-swappable drives.
PowerVault™ MD1220—Up to 24 2.5-inchSAS hot-swappable
drives.
When set in the top position, the enclosure is configured in
unified mode. When set in the bottom position, the enclosure is
configured in split mode.
MD1200 and MD1220 Front Bezel Feature and Indicators
Description
11