Dell PowerVault MD3000i Руководство пользователя - Страница 35

Просмотреть онлайн или скачать pdf Руководство пользователя для Хранение Dell PowerVault MD3000i. Dell PowerVault MD3000i 46 страниц. Configuration for vmware esx server software
Также для Dell PowerVault MD3000i: Руководство по настройке (32 страниц), Примечание по поддержке (22 страниц), Руководство по обновлению (28 страниц), Руководство по замене (4 страниц), Руководство по конфигурации (10 страниц)

Figure 24. Virtual Disk Copy Target Selection

After the virtual disk copy is established, it may be managed from the Virtual

Disk Copy tab. To stop a copy operation that is occurring, select the copy set

to modify, and click the Stop link from the Commands box. To recopy an

existing virtual disk copy, click the copy set, and click the Recopy link. To

delete a copy set, select the copy set to modify, and click the Remove Copy

link. This action removes the Virtual Disk Copy relationship between the two

virtual disks, but does not modify or delete the target virtual disk that will still

contain a copy of the original data from the source virtual disk.

Mapping a Virtual Disk

After creating new virtual disks, use the Mappings tab to present the virtual

disks to the ESX host for use. See Figure 25. From this view, you can manage

hosts, host groups, and virtual disk mappings. To present a new virtual disk to

an ESX host, click the Add Mapping link to start the Add Mapping wizard.

Dell MD Storage Array vCenter Plug-in