Dell PowerVault MD3660i Series Storage Array Руководство по началу работы - Страница 3

Просмотреть онлайн или скачать pdf Руководство по началу работы для Хранение Dell PowerVault MD3660i Series Storage Array. Dell PowerVault MD3660i Series Storage Array 10 страниц. Storage arrays
Также для Dell PowerVault MD3660i Series Storage Array: Руководство по аппаратному и программному обеспечению (25 страниц), Руководство по установке (11 страниц), Обновление информации (8 страниц), Инструкции по установке стоек (2 страниц), Настройка (2 страниц), Руководство по устранению неполадок (20 страниц), Руководство по устранению неполадок (18 страниц), Руководство по развертыванию (24 страниц)

Installation and Configuration

WARNING: Before performing the following procedure, review the safety instructions that came with the system.

WARNING: The weight of your system without the physical disks installed (empty weight) is 19.50 kg (43.0 lb) and

when fully populated with all the physical disks is 105.20 kg (232.0 lb).

WARNING: Your system must be installed by Dell certified service technicians. For safe installation of an empty

system, a minimum of three service technicians are required. To install a fully populated system, a mechanized

lifting tool is required to position the system in a rack.

WARNING: Install the physical disks into the system only after installing the system in the rack. Installing the

system in the rack with the physical disks installed can damage the disks or cause injury.

CAUTION: Before installing your system in the rack, ensure that the weight of the system does not exceed the

rack's weight limit. For more information, see the Rack Installation Instructions that shipped with your system.

NOTE: For weight stability, always load the rack from the bottom up.

Figure 1. Installing the System in a Rack

Unpack your system and identify each item.

Assemble the rails and install the system in the rack following the safety instructions and the rack installation

instructions provided with your system.