Dell PowerVault NX1950 Руководство по развертыванию - Страница 23

Просмотреть онлайн или скачать pdf Руководство по развертыванию для Хранение Dell PowerVault NX1950. Dell PowerVault NX1950 38 страниц. For vmware esx server software
Также для Dell PowerVault NX1950: Руководство по развертыванию (34 страниц), Важная информация Руководство (26 страниц), Начало работы (49 страниц), Руководство по установке и устранению неисправностей (48 страниц), Руководство по обновлению (18 страниц), Справочное руководство (4 страниц), Настройка (2 страниц), Использование (2 страниц), Руководство по конфигурации (11 страниц)

Печатать страницу
Dell PowerVault NX1950 Руководство по развертыванию
If you are using the Dell Systems Build and Update Utility on your system
for the first time, perform the following steps:
When prompted, click the appropriate language for your system.
a
The Dell Software License Agreement window appears. Read the
information carefully.
If you agree with all of the information, click Accept to continue.
b
If you do not agree with all the information, click Decline. Your system
restarts, and you will not able to complete the operating system
installation.
5 Click Server Setup to install the operating system.
The Set the Date and Time window appears.
6 Select the appropriate date, time, and time zone, and click Continue.
7 Select Microsoft Windows Server 2003 x64 Edition.
NOTE:
Select Microsoft Windows Server
NOTE:
Since the product identification (PID) is included on the operating
system media, providing your PID is not required. You are only prompted to
enter a PID during the Server Administrator installation if you use
Dell OpenManage 5.0 or earlier.
8 Click Continue.
The Configure the Hard Drive for Microsoft window appears.
9 The Configure or Skip RAID window appears. Perform the following
steps:
Select one of the following options, and then click Continue:
a
•
Configure RAID
•
Skip RAID configuration
NOTE:
Your system was pre-configured with hardware RAID1 using both the
internal hard disk drives, and this is the only supported hardware
configuration for your system.
If you selected Skip RAID configuration, go to step 10.
b
®
2003 x64 Edition.
Deployment Guide
23