Dell PS4100 Руководство по установке и настройке - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке и настройке для Хранение Dell PS4100. Dell PS4100 41 страница. Storage array
Также для Dell PS4100: Руководство по аппаратному обеспечению (50 страниц), Обзор (7 страниц), Настройка (2 страниц), Руководство по обслуживанию оборудования (47 страниц)

Installation and Setup Guide

1. Determine where to place the mounting rails in the rack.

2. Attach the mounting rails to the rack.

4. Attach the chassis to the front of the mounting rails.

5. Install the bezel.

These steps are described in detail in the following sections.

Determine Where to Place the Mounting Rails in the Rack

Make sure there is enough space in the rack for the chassis. In a standard rack, a 2U chassis will span six holes.

Install the rails in the rack following the safety instructions and the rack installation instructions provided with

your rail kit.

If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment

may be greater than room ambient. Therefore, make sure you install the equipment in an environment compatible

with the maximum ambient temperature (Tma) specified by the manufacturer. For more information, see

Technical Specifications on page

Slide the Chassis into the Rack

Figure 2

shows the front view of the 3.5-inch drive array.

Figure 2: 3.5-Inch Drive Array - Front View (without Bezel)

Figure 3

shows the front view of the 2.5-inch drive array.

Figure 3: 2.5-Inch Drive Array - Front View (without Bezel)

Be careful when lifting the chassis.

Caution:

With assistance, lift the chassis and slide it onto the mounting rails. Keep the chassis level.

Make sure the chassis captive fasteners on the front of the array line up with the threaded holes on the front of

the mounting rails, and manually secure the captive fasteners to the rails.

Do not use an automatic driver to tighten the thumbscrews.

Caution:

29.

2 Rack Mounting the Array