Dell PS6000 Обслуживание оборудования - Страница 34

Просмотреть онлайн или скачать pdf Обслуживание оборудования для Хранение Dell PS6000. Dell PS6000 50 страниц. Storage arrays
Также для Dell PS6000: Руководство по аппаратному обеспечению (50 страниц), Обзор (7 страниц), Краткое справочное руководство (2 страниц)

PS6000 Hardware Maintenance

Before installing a control module, make sure the firmware on the control

module's compact flash card matches the firmware running on the functioning

control module. See Maintaining Control Module Firmware on page 3-4.

Control modules are installed vertically in a PS6000 array, oriented as shown in

Figure 3-6.

Figure 3-6: Correct Control Module Orientation

Caution:

Wear electrostatic protection when handling a control module. See

Using an Electrostatic Wrist Strap on page 1-5.

To install a control module:

1. Open the control module latches by squeezing together the release mechanism

for each latch and then rotating each latch outwards. See Figure 3-4.

2. Correctly orient the control module as shown in Figure 3-6, depending on

which slot you are installing it in.

3. Hold the latches and slide the control module into the slot until you feel

resistance.

4. Rotate each latch inward, while pushing the control module completely into

the slot. The latches will snap into place (Figure 3-7).

3–12

Maintaining Control Modules