Dell Storage MD1400 series Руководство пользователя - Страница 14
Просмотреть онлайн или скачать pdf Руководство пользователя для Хранение Dell Storage MD1400 series. Dell Storage MD1400 series 37 страниц. Storage enclosure
Также для Dell Storage MD1400 series: Руководство по началу работы (7 страниц), Руководство администратора (48 страниц)
Печатать страницу
Figure 8. Removing and installing a 3.5-inch hard disk drive blank
1.
hard disk drive blank
Installing a hard disk drive blank
1.
If installed, remove the front bezel. See
2.
Insert the hard disk drive blank into the hard disk drive bay until the blank is fully seated.
3.
Close the handle to lock the blank in place.
4.
If applicable, install the front bezel. See
Removing a hard disk drive
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
If installed, remove the front bezel. See
2.
From the management software, prepare the hard disk drive for removal. Wait until the hard disk
drive indicators on the hard disk drive carrier indicates that the drive can be removed safely. See your
controller documentation for information about removing hot-swapable hard disk drive.
If the hard disk drive has been online, the green activity or fault indicator flashes as the hard disk drive
is turned off . When the drive indicators are off, the hard disk drive is ready for removal. See
drive indicator
patterns.
3.
Press the release button to open the hard disk drive carrier release handle.
4.
Pull the hard disk drive out until it is free of the hard disk drive bay. See
blank.
CAUTION: To maintain proper system cooling, make sure all empty hard disk drive bays have
blanks installed.
5.
Insert a hard disk drive blank in the empty drive bay. See
6.
If applicable, install the front bezel. See
14
2.
release tab
Removing the front
bezel.
Installing the front
bezel.
Removing the front
bezel.
Installing a drive
Installing the front
bezel.
Hard disk
Installing a hard disk drive
blank.