Dell C9000 series Руководство по конфигурации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Переключатель Dell C9000 series. Dell C9000 series 9 страниц.

Set the IP address for RPM 1:

Dell(conf)#interface ManagementEthernet 1/0

Dell(conf-if-ma-1/0)#ip address <ipaddress> <mask>

Dell(conf-if-ma-1/0)#no shutdown

Dell(conf-if-ma-1/0)#exit

Set the virtual IP address:

Dell(conf)#virtual-ip <ipaddress> <mask>

2.4

Configure route for OOB management port (optional)

Dell(conf)#management route X.Y.Z.0 /24 A.B.C.1

X.Y.Z.0

Note:

the switch. If your management system is on the same subnet as the switch, the previous step may be

omitted. The example above assumes a class C subnet mask.

2.5

Dell(conf)#username admin privilege 15 password 0 yourpassword

Dell(conf)#enable password level 15 0 yourpassword

2.6

Option 1: Enable ports individually by entering the port number.

Dell(conf)#interface tengigabitethernet 0/0

Dell(conf-if-te-0/0)#switchport

Dell(conf-if-te-0/0)#exit

Dell(conf)#exit

Option 2: Enable multiple ports at once using the 'range' parameter.

Note: This example configuration shows details for configuring linecards 0 and 1. Use the proper port

range for your SAN environment.

Dell(conf)#interface range tengigabitethernet 0/0–23 , tengigabitethernet 1/0–23

Dell(conf-if-range-te-0/0-23,te-1/0-23)#switchport

2.7

Dell(conf-if-range-te-0/0-23,te-1/0-23)#mtu 12000

SCG2011

Dell Networking C9000 Series Switch Configuration Guide for Dell SC Series SANs

is the network your management system is connecting from and

A.B.C.1

is the gateway for