Dell N1108P-ON Руководство по началу работы - Страница 15

Просмотреть онлайн или скачать pdf Руководство по началу работы для Переключатель Dell N1108P-ON. Dell N1108P-ON 27 страниц.

NOTE:

port via the local CLI. Only one USB console session at a time is supported.

Connecting an N1100-ON Series Switch to a

Power Source

CAUTION:

Read the safety information in the

manual as well as the safety information for other switches that connect to or

support the switch.

The N1100-ON Series models have one internal power supply. The power

receptacle is on the rear panel.

1 Make sure that the switch console port is connected to a PC running a

VT100 terminal emulator via the USB to USB Type B cable.

2 Using a 5-foot (1.5 m) standard power cable with safety ground connected,

connect the power cable to the AC main receptacle located on the rear

panel.

The PoE model switches have a heavy-duty power cable with a notched

connector for the switch power receptacle. Use of this type of cable is

mandatory for PoE-capable switches.

3 Connect the power cable to a grounded AC outlet.

Console access to the stack manager is available from any console

Safety and Regulatory Information

Getting Started Guide