Allied Telesis AT-AR021 (S) BRI-S/T Руководство по установке и безопасности - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке и безопасности для Сетевая карта Allied Telesis AT-AR021 (S) BRI-S/T. Allied Telesis AT-AR021 (S) BRI-S/T 8 страниц. Port interface card
Также для Allied Telesis AT-AR021 (S) BRI-S/T: Руководство по установке (13 страниц), Руководство по установке (13 страниц), Руководство по быстрой установке (10 страниц)

9. Slide the PIC into place.

PIC bays should be filled in numerical order, starting with the lowest available

bay (e.g., bay 0) followed by bays with progressively higher numbers.

10. Secure the PIC by tightening its thumbscrews.

11. Apply power to the switch or router.

Re-attach the power cord, and reconnect any redundant power supply.

12. Test the PIC.

There are several ways to check the PIC is installed and functioning correctly.

The show system command displays general system information about PICs

and any other hardware installed, as well as memory, software version and

patches loaded on the switch or router.

See the Port Interface Card Hardware Reference for detailed information on PIC

testing.

Setting the ISDN Territory

You must change the default ISDN territory to your region before you connect an

ISDN PIC to your Telecommunications Network. Use the command:

set system territory={australia|china|europe|japan

|korea|newzealand|usa}

In Australia only:

To use the Micro service, set the territory to australia.

■

To use the OnRamp service, set the territory to europe.

■

See the Software Reference provided with your switch or router for further

information on configuring ISDN.

613-000601 Rev A

Port Interface Card