Dell PowerEdge 6400 Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Переключатель Dell PowerEdge 6400. Dell PowerEdge 6400 42 страницы. Wake-on-lan (wol) support on dell servers
Также для Dell PowerEdge 6400: Установка стойки (37 страниц), Руководство по установке обновления (42 страниц), Установка стойки (34 страниц), Руководство по установке (37 страниц), Руководство (10 страниц), Установка (4 страниц), Сборка и установка (32 страниц), Руководство (10 страниц), Руководство (15 страниц)

support.dell.com

Determine where you want to install the system in the rack.

Position the VersaRail's mounting flange against the inner side of the rack's front

vertical rail so that the bottom of the VersaRail is aligned with the 0.125-inch

spacing on the rack's front vertical rail (see Figure 1-1 for 2U systems and Figure

1-2 for 4U and 7U systems).

NOTE: The vertical rails in your rack may have round or square holes.

Each unit on the vertical rail consists of one 0.125-inch spacing and two

0.250-inch spacings. The 0.125-inch spacing is the beginning of a unit.

— For 2U systems, the bottom mounting hole in the VersaRail aligns with the

second hole from the 0.125-inch spacing on the vertical rail.

— For 4U systems, the bottom mounting hole in the VersaRail aligns with the

third hole from the 0.125-inch spacing on the vertical rail.

— For 7U systems, the bottom mounting hole in the VersaRail aligns with the

fourth hole from the 0.125-inch spacing on the vertical rail.

Secure the front of the VersaRail to the rack using two Phillips-head screws (see

Figure 1-1 for 2U systems and Figure 1-2 for 4U and 7U systems).

0.125-inch

rail spacing

right-front rail

second

mounting hole

bottom of VersaRail

Installing VersaRails

1-3