Dell PowerEdge M710HD Руководство по началу работы - Страница 6

Просмотреть онлайн или скачать pdf Руководство по началу работы для Переключатель Dell PowerEdge M710HD. Dell PowerEdge M710HD 12 страниц. Dell poweredge blade servers getting started guide
Также для Dell PowerEdge M710HD: Руководство по обновлению (44 страниц), Руководство по обновлению (21 страниц), Руководство по обновлению (14 страниц), Руководство по установке (7 страниц), Руководство по обновлению (1 страниц), Руководство по началу работы (12 страниц), Руководство по началу работы (12 страниц), Руководство по портфолио (27 страниц), Руководство по началу работы (14 страниц)

Connecting The System To Power

Figure 6. Connecting Power to the System

Connect the system's power cables to the system power supplies.

CAUTION: To prevent the power cables from being disconnected accidentally, use the plastic clip on each power

supply to secure the power cable to the power supply, and use the strap to secure the power cable to the strain-

relief bar.

CAUTION: For AC power supply, do not plug the power cables directly into a power outlet; you must use a PDU. For

optimal system functionality, a minimum of three power supplies are required.

Plug the other end of the power cables of the AC power supplies into a power distribution unit (PDU). For DC power

supplies, plug the other end of the power cables to a branch-protected DC power source.

NOTE: The power supply units must have the same maximum output power.

NOTE: AC and DC power supplies cannot be mixed in an enclosure.

Turning On The Enclosure

Figure 7. Enclosure Power Button

Press the power button on the enclosure. The power indicator should light.