Dell S4048-ON Руководство по устранению неполадок - Страница 17
Просмотреть онлайн или скачать pdf Руководство по устранению неполадок для Переключатель Dell S4048-ON. Dell S4048-ON 29 страниц. Enterprise switches
Также для Dell S4048-ON: Руководство по конфигурации (19 страниц), Руководство по конфигурации (30 страниц)
Печатать страницу
C-Row
Description
Parameter
C
The row identifier.
Type
CPLD, FPGA, or TPM.
Address
The address of the device. For CPLD on an I2C bus, this is an 8–bit address. For PCI, this is the bus:dev:function in
a packed 32–bit word, 8–bits each. For memory, this is the address. LPC is unknown.
Name
The text name for the device.
Interface
i2c, pci, mem, io, or lpc.
Bus
For devices on multiple busses, this indicates the bus number (for example, 0 for i2c indicates /dev/i2c-0. For PCI,
this holds the bus-dev-func in a 32–bit value with each byte representing bus, device and functions in that order
(for example, 0x020304 represents bus 02, device 03, and function 04).
Version Reg
The register that contains the version for the device.
Version Mask
The bits to use to check the version.
The following describes the R-row configuration file tree output.
R-Row
Description
Parameter
R
The register identifier.
Address
The register addresses (offset) in the device.
Register Size
Describes how many bits the register contains (for example, 8, 16, or 32).
Register Mask
Lists the valid bits in this register.
Name
The text name of this register.
Access Perm
Access permissions:
RO — Read only
RW — Read/Write
RC — Clear on Read
WO — Write only
Default Value
The default value of this register.
Testable
1 — The register can be tested against the default value.
0 — The register is not testable.
Version
The version of the register. There can be multiple definitions of a register based on the version. When the test
creates a configuration file from a device list with several versions, a specific version is requested and if the version
requested is the last version prior to or equal to the requested version, it is put into the configuration file.
The following describes the B-row configuration file tree output.
B-Row
Description
Parameter
B
The bit row identifier.
ONIE diagnostics
17