EarthQuake ECS6D Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Динамики EarthQuake ECS6D. EarthQuake ECS6D 8 страниц. Edgeless high fidelity in-ceiling ecs speaker series
Также для EarthQuake ECS6D: Руководство по установке (8 страниц)
Печатать страницу
ECS8D Settings & Options
The ECS8D is equipped with two (2) switches: the Bipole/Dipole switch and the
Surround/DVC switch. The two switches work independently, they are used to
customize the ECS6D performance for different applications.
In Dipole mode, the speaker is in STEREO mode (2 speakers in 1). The two
terminals are totally independent (2 separate inputs, using both terminals).
Each terminal has an impedance of 8-Ohm. The speaker can be set in Surround
or in DVC mode depending on the listener preferences. In Bipole mode, the
speaker is in MONO mode. The two terminals are internally connected in
parallel (1 input needed, using only one terminal). The total speaker impedance
is 4-Ohm. Again, he speaker can be set in Surround or in DVC mode depending
on the listener preferences.
In DVC mode, the speaker exhibits higher level of details & separation between
L & R channels. The Surround mode gives the speaker response more
surround feeling, deeper warmer bass & more blending between L & R
channels.
Bipole
Dipole
+
+
1
3
_
_
2
4
Terminal A
Terminal B
(connect both terminals A & B)
1/2 = 8-Ohm
&
3/4 = 8-Ohm
High Definition Stereo application using one (1) ECS8D:
- Set switch #1 in Dipole mode
- Set switch #2 in DVC mode
- Impedance 8-Ohm per terminal
- Connect both terminals A & B separately (2 separate inputs / left & right)
#1
Bipole
Dipole
2
Surround
DVC
Terminal A
#2
(connect both terminals A & B)
8
Specifications are subject to change without notice
Surround
Bipole
Dipole
+
+
1
3
_
_
2
4
Terminal A
Terminal B
(connect one terminal A or B)
+
+
1
3
1/2 = 8-Ohm
&
_
_
4
3/4 = 8-Ohm
Terminal B
Surround Effect Stereo application using one (1) ECS8D:
- Set switch #1 in Dipole mode
- Set switch #2 in Surround mode
- Impedance 8-Ohm per terminal
- Connect both terminals A & B separately (2 separate inputs / left & right)
#1
Bipole
Dipole
Surround
DVC
#2
Mono application using one (1) ECS8D:
DVC
- Set switch #1 in Bipole mode
- Set switch #2 in DVC mode
- Total impedance 4-Ohm
- Connect one (1) terminal A OR B (1 input)
#1
Bipole
Dipole
Surround
DVC
#2
Surround Effect Mono application using one (1) ECS8D:
- Set switch #1 in Bipole mode
- Set switch #2 in Surround mode
- Total impedance 4-Ohm
- Connect one (1) terminal A OR B(1 input)
#1
Bipole
Dipole
Surround
DVC
#2
www.earthquakesound.com
ECS8D Settings & Options
+
+
1
3
_
_
2
4
Terminal A
Terminal B
(connect both terminals A & B)
+
+
1
3
_
_
2
4
Terminal A
Terminal B
(connect one terminal A or B)
+
+
1
3
_
_
2
4
Terminal A
Terminal B
(connect one terminal A or B)
1/2 = 8-Ohm
&
3/4 = 8-Ohm
9