AVYCON AVR NT832A Краткое руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование AVYCON AVR NT832A. AVYCON AVR NT832A 11 страниц.

1 Notes

Please read this instruction carefully before using the product and keep it for further

reference.

All the examples and pictures used here are for reference only.

The contents of this manual are subject to change without notice.

This device should be operated only from the type of power source indicated on the

marking label. The voltage of the power must be veriﬁed before using the same.

Please check the device and the accessories after getting the device. If there are any

damages, shortages or defects, please contact your dealer immediately.

This series of the product supports 8 SATA hard drives. The pictures of the installation are

only for reference, please take the real object as the standard. Please make sure that the

device is powered off before the installation.

① Remove the cover and loosen the screws to take out two rails.

② Fasten the HDDs onto the rails.

③ Install the two rails with HDDs back to the device ( It is recommended to install the posts

supporting the upper rail as shown on the above right ).

④ Connect the power and data cables.

⑤ Install back the cover and secure it with the screws.

NETWORK VIDEO RECORDER | AVR SERIES | NOTES