Allied Time USA AT-2700 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Часы Allied Time USA AT-2700. Allied Time USA AT-2700 8 страниц.
Печатать страницу
PAY=MONTHLY
Monthly pay cycle (EDATE=LAST): press Enter and use
pay cycle options:
1) LAST: your pay cycle ends on the last day of each month.
2) LAST-1: your pay cycle ends 1-Day prior to the end of each month.
3) LAST-2: your pay cycle ends 2-Days prior to the end of each month.
4) LAST-3: your pay cycle ends 3-Days prior to the end of each month.
5) LAST-4: your pay cycle ends 4-Days prior to the end of each month.
6) LAST-5: your pay cycle ends 5-Days prior to the end of each month.
ST
7) 1
: your pay cycle ends 1
After you make your selection, press Enter to confirm and proceed to the next step.
Password
2.
: Optional Password for Menu Access (PWD=NO): use this feature to setup custom
password to protect menu access. Press Enter, use
combination, and press Enter again to confirm. Once setup, Password entry will be required
every time the settings menu is being accessed. NOTE: if you forgot your password, please
contact Allied Time at 888-860-2535 for special reset instructions.
Clear Data
3.
(CLEAR DATA?=NO): This function will allow you to clear out the clocking in
sequence stored in the machine. Press Enter, use
confirm.
Factory Default
4.
employee punch history and ALL of your custom settings. Press Enter, use
and press Enter again to confirm. The clock will beep several times indicating reset completed.
Hidden Menus
5.
under program mode. These settings will be available behind the setting "RESET"
5.1 Page Sensor: (T.C.AUTO=ON): Use this feature to activate two-sided card printing option.
Press Enter, then "+" to Change to TC.AUTO=OFF
Note: after this change, the clock will accept either side of the time card once the pay cycle
RESETS. Ex. for weekly pay cycle, you can use FRONT side for week one and then use BACK side
for week two. Do not flip the card to the back side until your pay cycle is completed.
5.2 UP Down Adjustment: UPDOWN ADJUST=05 (00~09): This feature allows the printer to print
slightly up or down.
5.3 Left Right Adjustment: LEFTRIGHT ADJ=05 (00~09): This feature allows the printer to print
slightly left or right.
Page | 6
: select this option for monthly pay cycle. Select the Ending Date for the
st
day of each month.
: Reset to Factory Defaults (RESET?=NO): use this feature to clear ALL
: You will be able to access hidden menu if you press "+" "-" and "ENTER"
+/-
buttons to select one of the following
+/-
keys to select desired password number
+/-
keys to select YES and press Enter again to
+/-
keys to select YES