EarthQuake MiNi D1500.2 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Усилитель EarthQuake MiNi D1500.2. EarthQuake MiNi D1500.2 8 страниц. Mini d series

Печатать страницу

SIGNAL SENSING FEATURE - AUTO ON/REMOTE ON

MiNi D1500.2

MiNi D3000.4

The

SENSING Feature which allows installers to turn on the amplifier without using the

remote wire.

By simply connecting the RCA or Speaker level inputs to the amplifier, it will turn on

automatically when it senses an audio signal. This feature makes upgrading the

sound system in many of the latest model vehicles easier for installers as it

eliminates the need to connect a remote turn on wire to the amplifier.

Before you proceed, please note the following:

This feature may not be compatible with all latest model vehicles.

If your vehicle is going to be parked for over 4 weeks, then you should

disconnect the main fuse of the amplifier.

Be sure to follow the connection instructions and illustrations shown.

When the switch is on AUTO ON, the amplifier will

automatically detect an incoming signal when the

stereo is turned on. If the amplifier does not detect any

signal after 20 minutes, the amplifier will automatically

turn off.

In case the system goes into protection, simply turn off

the audio source and slide the switch to RESET then

back to AUTO ON position.

When the switch is on REMOTE ON, the amplifier relies

on the remote wire to detect the signal and turn the

amplifier on or off.

Specifications are subject to change without notice

amplifier features a special AUTO SIGNAL

The proper power and remote wire connection when using the Auto Signal Sensing

is illustrated below.

POWER

GND

REM

(–)

16-gauge

(!) DO NOT connect the remote wire to the battery wire as this will make the

amplifier's auto sensing feature not work properly.

GND

(!) DO NOT connect the remote wire to the head unit as this will damage your

sound system.

GND

NOTE: RCA outputs must be inserted in CH1/2 for the amplifier to detect any

incoming signal.

BAT

(+)

POWER

REM

BAT

(–)

(+)

16-gauge

POWER

REM

BAT

(–)

(+)

16-gauge