Allied Vision MANTA Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Камера безопасности Allied Vision MANTA. Allied Vision MANTA 18 страниц.
Печатать страницу9. With the pliers, grip the detached corner of tape and slowly pull it off the cover glass and off the sensor
baseplate.
Figure 5: Pliers pulling the adhesive tape off the sensor (schematic view)
10. Strip off the tape from the pliers.
11. Put the pliers aside.
12. Repeat steps
5.
to 11., until all adhesive tapes have been removed from the sensor.
13. With one hand pushing the spatula against the cover glass, take the camera into the other hand.
14. Rotate the camera with the sensor facing down.
15. Slowly release the spatula from the cover glass until it disengages from the camera.
Figure 6: Rotating the camera to drop the cover glass (schematic view)
Damage to the sensor
If dirt penetrates the sensor surface, the sensor can be damaged.
• To protect the sensor from dirt, mount the camera into a housing immediately.
Pliers
Camera
2
Spatula
1
NOTICE
Page 6 of 18
Preparing Cameras without
Sensor Cover Glass