Allied Vision Goldeye G-033 SWIR Краткое руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для IP-камера Allied Vision Goldeye G-033 SWIR. Allied Vision Goldeye G-033 SWIR 17 страниц.
Печатать страницу
Installing a Gigabit Ethernet network card
If your host computer has an available Ethernet interface, this can be used with
Allied Vision GigE cameras. We recommend that your camera system uses a
dedicated Ethernet interface not shared with Internet or local area networks. If
more interfaces are needed, or your existing Ethernet adapter is unable to
operate at Gigabit Ethernet speeds, installing additional hardware may be
required.
• For desktop systems, use a PCI Express bus Ethernet adapter.
• For laptops, use an expansion slot via an Express Card.
Configuring Ethernet adapter
Install the network card driver from your network card manufacturer.
Read the frame grabber software installation guide provided by the frame
grabber manufacturer.
Modifying Ethernet adapter IP address
After Ethernet adapter hardware installation, connect the Ethernet adapter
directly to the camera. The default configuration assigns an IP address
automatically, using the Link-Local Address range of 169.254.xxx.xxx.
11