EarthWay 0-52732-90399-9 Инструкция по сборке Руководство - Страница 2
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Разбрасыватель EarthWay 0-52732-90399-9. EarthWay 0-52732-90399-9 8 страниц. 100lb stainless steel ice melt spreader
Печатать страницуAssembly and Operation Instructions
HELPFUL HINTS
Read the directions before assembly.
If your spreader does not spread evenly, be sure "FRONT" on the GEARBOX points to the front of the spreader. The
impeller must turn clockwise when pushing forward. Reversing the GEARBOX during assembly will cause issues.
Your spreader is calibrated for three miles per hour, which is a brisk walking speed. Slower or faster speeds will
change the spread pattern. Do not use powdered materials as it will damage the gearbox.
Gears are permanently lubricated at the factory. Do not open the GEARBOX or dirt may enter.
SPREADER ASSEMBLY INSTRUCTIONS
Remove all components and hardware
Step 1:
items from the box. Place the spreader hopper
upside down and facing away from yourself.
Install FRAME using (4) #14 x 1½" Flat
Step 2:
Head Phillips screws. TIGHTEN THESE NOW
Install impeller onto pinion shaft by
Step 3:
pressing the impeller as shown onto the pinion shaft
and turning the impeller while holding the pinion
shaft to engage with the COIN fully, and press down
to secure.
Next, insert Cross Brace thru the Gearbox Brace as
shown above.
90399_M52162_Oct_2021.docx
PAGE 2