ALLIMEX SolarSpeed Инструкции по монтажу - Страница 12

Просмотреть онлайн или скачать pdf Инструкции по монтажу для Солнечная панель ALLIMEX SolarSpeed. ALLIMEX SolarSpeed 15 страниц. East-west facing landscape

Печатать страницу

INSTALLATION

9. RIDGE CONNECTOR

For roofs with a slight pitch, we strongly recommend the use of ridge connectors. These pre-

vent the system from slipping.

Transverse ridge connections

With the transverse ridge connection, the transverse ridge profile is placed over the ends of the pro-

files. In the middle, the ridge profile can be folded to the appropriate angle. It is then fastened to the

base units with 8 self-tapping screws.

Longitudinal ridge connections

With the longitudinal ridge connection, the basic units are connected to each other by means of an L

profile. These are fixed with at least two self-tapping screws to the top of both rails. For a roof pitch

of more than 2° it is also recommended to install L-profiles over the full width (in East-West direction)

to prevent the structure from sinking unevenly.