Christie 38-804785-01 Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Стойки и подставки Christie 38-804785-01. Christie 38-804785-01 12 страниц. Universal flat-panel mount
Печатать страницуInstalling the adapter plate
WARNING
: Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could
result in serious personal injury and possible damage to the flat panel.
INVERT THE FLAT PANEL AND PLACE IT ON A SOFT, FLAT SUFRACE TO PREVENT DAMAGE TO THE FLAT PANEL. USE A BLANKET, FOAM, ETC.
FAILURE TO DO SO WILL RESULT IN DAMAGING THE FLAT PANEL. DO NOT LAY THE PLASMA ON THE FLOOR WITHOUT ANY PROTECTION TO
THE GLASS. THE FLAT PANEL IS HEAVY AND FRAGILE. AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR
INSTALLATION OF THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE
Invert your flat panel and lay it gently on a soft and flat surface so
no damage will occur. Align the adapter plate with the four (4)
outer mounting points on the back of the flat panel, and then
secure it by using the four (4) M6 X 12 phillips head screws and
flat washers (supplied). See figure 1.
Adapter plate
Blanket, foam etc.
WARNING!
FLAT PANEL.
M6 x 12 Phillip
screws
Flat washers
Inverted flat panel
Flat surface
- 5 -