Miele PW 6207 EL План установки - Страница 9
Просмотреть онлайн или скачать pdf План установки для Стиральная машина Miele PW 6207 EL. Miele PW 6207 EL 10 страниц.
Также для Miele PW 6207 EL: План установки (17 страниц)
Печатать страницу
Cold water
Water pressure/Min. flow rate
Hard water
Water pressure/Max. flow rate
Max. volume flow
2 Connector hoses with threaded joint ¾" including Y fitting
(¾" / 1") optionally included with the unit.
Threaded connector fitting at site as per DIN 44 991 (flat
sealing)
Length of connector hose
Average water requirement for a standard program (60°
colored washing) determined at cold, hot and hard water
connection.
Cold water
Water pressure/Min. flow rate
Liquid dispensing
Water pressure/Max. flow rate
Max. volume flow
1 Connector hose with threaded joint ¾" optionally included
with the unit.
Threaded connector fitting at site as per DIN 44 991 (flat
sealing)
Length of connector hose
Drainage
Max. water outflow temperature
Dump valve
Drainage supports in machine (outer diameter)
On-site drain connection (inner diameter)
Max. transient throughput
Vented drainage required. If ventilation is insufficient, fit
Miele kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of suffi-
cient cross-section.
Fittings
without plinth
It is essential to ensure that the appliance is fastened ade-
quately to the substrate!
Fastening material included with unit:
A sufficiently firm substrate with sufficient load-bearing
capacity is necessary for the installation. The fastening
material included is only suitable for a solid concrete sub-
strate. The fastening material for other suitable substrates
must be provided on site.
on concrete platform
It is essential to ensure that the appliance is fastened ade-
quately to the substrate!
Fastening material included with unit:
The quality of the concrete and its strength must be as-
sessed according to the machine load. Ensure that the
location of the platform is fixed adequately in the case of
dynamic loads!
Miele base
It is essential to ensure that the base is fastened adequately
to the substrate!
Fastening material included with base:
The installation and assembly of the appliance and base
must follow the installation instructions provided
Technisches Datenblatt / Technical datasheet: PW 6207 EL
Datum / Date: 12-01-2011
2 × wood screws DIN 571 (Ø × length)
2 × screw anchors (Ø × length)
2 × wood screws DIN 571 (Ø × length)
2 × screw anchors (Ø × length)
4 × wood screws DIN 571 (Ø × length)
4 × screw anchors (Ø × length)
14.5 psi
100 kPa
145.04 psi
1,000 kPa
7 gal/min
32 l/min
1" external
1" external
thread
thread
4„ 11 1/16"
1,500 mm
19 gal/h
approx. 72 l/h
14.5 psi
100 kPa
145.04 psi
1,000 kPa
1.45 gal/min
5.5 l/min
¾" external
¾" external
thread
thread
4‟ 11 1/16"
1.500
203°F
95 °C
2 15/16"
75 mm [DN 70]
[DN 2 3/4"]
2 15/16" [DN
75 mm [DN 70
2 3/4" sleeve]
sleeve]
43.99 gal/min
200 l/min
1/2" x 3 9/16"
12 x 90 mm
5/8" x 3 1/8"
16 x 80 mm
1/2" x 3 9/16"
12 x 90 mm
5/8" x 3 1/8"
16 x 80 mm
5/16" x 3 1/8"
8 x 80 mm
1/2" x 2 3/8"
12 x 60 mm
Seite / Page:
9