Allmand Night-Lite E Series Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Осветительное оборудование Allmand Night-Lite E Series. Allmand Night-Lite E Series 20 страниц. Portable light tower

Печатать страницу

The lights will automatically come on in

the absence of ambient light.

NOTE: For most consistent operation,

avoid locating the unit in a shadowed

area, and orient the unit so the control

box faces north or south.

Timer Operation

Turn the Photocell / Timer switch (B,

Figure 13) to the TIMER position.

To set the timer:

1. Reset the timer module (first time

use):

a. With a blunt object press and

release the Reset button (I, Figure

14). The timer screen (C) will flash.

b. Press the Clock (A, Figure 14) and

Hour (E) buttons simultaneously.

The time will reset to 12:00am.

2. Set the clock:

a. If currently in Daylight Savings

Time, press the +1h button (H,

Figure 14). (If not, bypass this step.)

b. Press and hold the Clock button

(A, Figure 14) while simultaneously

pressing the Day (D), Hour (E) and/

or Minute (F) buttons until the cor-

rect day and time appears.

3. Set the Timer

a. Timer On:

• Press the Timer button (B, Figure

14) once. ON will appear to the

left of the display.

• Press the Day button (D, Figure

14) repeatedly to turn on or off

each day the timer will turn on.

• Press the Hour (E, Figure 14)

and Minute (F) buttons until the

desired time for the timer to turn

on appears.

b. Timer Off:

• Press the Timer button (B, Figure

14) again. OFF will appear to the

left of the display.

• Press the Day button (D, Figure

14) repeatedly to turn on or off

each day the timer will turn off.

• Press the Hour (E, Figure 14)

and Minute (F) buttons until the

desired time for the timer to turn

off appears.

c. The timer can be set for seven dif-

ferent events. Repeat Steps 3a and

3b as needed. The number of the

timer event is displayed next to the

timer ON / OFF display.

Figure 14

Uni t Shutdown

Once lighting operations are complete

at the work site, perform unit shutdown:

1. Shut down the lights. See Operating

The Tower Lights.

2. Wait 10 minutes for the lights to cool.

3. Lower the light tower mast. See

Raising And Lowering The Light

Tower Mast.

4. Retract the outriggers. See Leveling

And Stabilizing The Portable Light

Tower.

5. Rotate the light tower mast to the

transport position. See Adjusting

The Lights.

6. Adjust the light fixtures to the trans-

port position. See Adjusting The

Lights.

7. Store the remote tower control.