Miele DA 6590 W Инструкция по эксплуатации и монтажу - Страница 12

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации и монтажу для Посудомоечная машина Miele DA 6590 W. Miele DA 6590 W 40 страниц. Incognito wall ventilation hood
Также для Miele DA 6590 W: Руководство по эксплуатации и установке (40 страниц), Технические характеристики (4 страниц), Схема установки (1 страниц)

Miele DA 6590 W Инструкция по эксплуатации и монтажу
Operation
Automatic safety shut-off
The fan will turn automatically off 10
hours of use. The lighting however will
remain on.
^ Press the On/Off button K to turn the
fan back on again.
Filter timer [—
A timer counts the hours of fan
operation.
The timer signals that the filters need to
be cleaned or replaced by turning on
the grease filter symbol [ or the
odor-free filter symbol —.
See "Cleaning and care" for information
on cleaning and replacing filters and
resetting the timers.
Reprogramming the grease filter
timer [
The timer may be set to suit your
cooking habits.
– If you often roast and fry foods,
choose a shorter operating time.
– If you tend to cook fat-free, choose a
longer operating time.
– If you cook only occasionally, it is
better to choose a shorter operating
time. This is because accumulated
grease will harden over time, making
cleaning difficult.
The factory setting for the grease filter
timer is 30 hours. You can adjust the
time to 20, 30, 40 or 50 hours.
12
^ Press the On/Off button K to turn the
fan off
^ Press the delayed shut down button
5 ¢15 and the filter button [— at
the same time.
The grease filter symbol [ of the filter
button and one of the power level
indicators flash.
The 1 to IS indicators show the
programmed time:
Indicator 1 . . . . . . . . . . . . . . . . 20 hours
Indicator 2 . . . . . . . . . . . . . . . . 30 hours
Indicator 3 . . . . . . . . . . . . . . . . 40 hours
Indicator IS . . . . . . . . . . . . . . . 50 hours.
^ Press – to select a shorter operating
time or + for a longer one.
^ Save the setting by pressing the filter
button [—.
All the lights will go out.
If the procedure is not stored within 4
minutes, the hood will automatically
default to the original setting.