Miele G 636 Руководство по установке - Страница 29

Просмотреть онлайн или скачать pdf Руководство по установке для Посудомоечная машина Miele G 636. Miele G 636 40 страниц. G 600 / g 800 series dishwasher
Также для Miele G 636: Руководство по установке (40 страниц), Руководство по установке (48 страниц), Руководство по установке (40 страниц)

An air gap is built into the water inlet

system to prevent potable water from

mixing with waste water.

The dishwasher can heat its own water

to the temperatures required by the

wash program. This allows the option of

connecting the machine to either a hot

or cold water source.

^ For lowest energy consumption

connect the dishwasher to a cold

water source.

^ For fastest possible wash times, with

slightly higher energy consumption,

connect the dishwasher to a hot

water source.

Recommended temperature:

120 °F (49 °C), max 140 °F (60 °C)

Must be between 5 - 145 psi

(0.3 -10 bar).

If the water pressure is too low, the

"Intake/Drain" or "Intake" indicator may

flash (see Operating Instructions/

"Frequently asked questions").

If the water pressure is too high, a

pressure reducer must be installed.

The water inlet hose comes equipped

with a

" female hose thread

connector. This can be directly

connected to a shut off valve with

MHT (male hose thread ends).

The hose assembly should be installed

vertically so the hose exits from the

bottom of the valve box (not as shown).

If this is not possible, it can be installed

horizontally, provided the hose exit

remains beneath the main body of the

valve box (see illustration). The valve

box should also be installed so that it is

at least 10" (24 cm) above the floor (or

base of the cabinet), so that the excess

coiled hose will remain lower than the

valve box at all points.