Miele GDU 45/65 Руководство по монтажу - Страница 21

Просмотреть онлайн или скачать pdf Руководство по монтажу для Посудомоечная машина Miele GDU 45/65. Miele GDU 45/65 48 страниц. Decor set

Step 6.

Removing the front panel

Pull the dishwasher out from under the

countertop as far as is necessary to

reach the 2 locking screws located on

each side of the door.

Loosen the screws on each side of

the door, and remove the front panel.

Unscrew and remove the decor

strips on the edges of the front panel.

Remove the insert and proceed to

the next step.

Situation A - Changing the color of

the decor insert:

Use the existing decor insert as a

template, or cut the new insert to the

dimensions shown below, that corre-

spond to your machine.

Dimensions for custom decor insert:

for use when changing colors only

H 25 11/16" x W 23 1/8" (H 653 mm x

W 587 mm) (for 23 1/2" (60 cm) wide

dishwashers)

H 25 11/16" x W 17 3/16" (H 653 mm x

W 437 mm) (for 17 1/2" (45 cm) wide

dishwashers).

Situation B - shortening the existing

decor insert:

Remove the decor strips, decor insert,

backing panel and polystyrene

spacers. Shorten the decor insert,

backing panel, and decor strips,

from the top, by the amount calcu-

lated in Step 5.

(15/16" (24 mm) in the previous

example).

Please note:

Use masking tape along the cutting

line to protect the decor insert and

strips from scratches while cutting

them to length.

Use a cutting tool suitable for the ma-

terial. If necessary have the decor in-

sert cut by a qualified professional.