Miele KM 89-2 Руководство по установке - Страница 38
Просмотреть онлайн или скачать pdf Руководство по установке для Посудомоечная машина Miele KM 89-2. Miele KM 89-2 48 страниц. Freestanding, built-under and integrated dishwashers
Также для Miele KM 89-2: Руководство по эксплуатации (20 страниц), Руководство по эксплуатации (20 страниц)
Печатать страницу
Plumbing
Connection to the water inlet
,
Water in the dishwasher must
not be used as drinking water.
– The dishwasher may be connected
to a cold or hot water supply, max.
60 °C. When connected to a hot wa-
ter supply all programme stages
which would otherwise be carried out
with cold water (pre-wash and
interim rinse) as well as the Pre-wash
programme will be carried out with
hot water.
– The programme "Energy save"
(without heater) needs connection to
a hot water supply with a
temperature of at least 45 °C.
– The inlet hose is approx. 1.5 m long; a
longer hose (4 m), or a 1.5 m long
flexible metal hose tested to withstand
pressure of 140 bar may be bought
from the Miele Spare Parts Dept.
– A stopcock with a 3/4 " male thread
must be provided on site.
– The dishwasher is constructed to
comply with DVGW regulations, and
may be connected to a suitable
supply without an extra non-return
valve if national regulations allow
this.
– The water pressure (flow pressure at
the take-off point) must be between
0.3 and 10 bar. If the water pressure
is too low the Water "inlet" or "inlet /
drain" light (depending on model)
may light up, (see "Problem solving
guide" in the Operating Instruction
booklet).
38
If the water pressure is too high, a
pressure reducer valve must be
fitted.
!
The inlet hose must not be
shortened or damaged in any way
as it contains electrical components
(see illustration).
If the stopcock is situated in the
worktop, a special angle connector can
be ordered from the Miele Spare Parts
Dept. (Part No. 04 274 820).