Allmatic AM900ECO Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Блок управления Allmatic AM900ECO. Allmatic AM900ECO 8 страниц. Programmable control unit for rolling shutters
Печатать страницу
6.2 With the hidden key of a transmitter already learnt.
Always when the automation is still, press with the help of a clip the hidden key of a transmitter already learnt. The beginning of the learning proce-
dure is indicated by some long beeps at each second. Once entered into the learning stage follow the procedure mentioned at point 6.1.1 in case you
need to learn a two buttons transmitter or follow the procedure at point 6.1.2 in case you wish to learn a three buttons transmitter.
7. Selectable functions through dip-switch
It is important to change the configuration of the dip-switch only when the unit is
turned off!!! Turn off the power supply during the change of configuration.
Default settings
The control board is supplied with the dip-switches set as indicated in the Pict. 1. In the table are sum up the functions that can be selected through
these dip-switches.
Fig.1: impostazione di
fabbrica dei dip
7.1 Functioning on opening/closing aper-
This function enables to select the method of opening/closing of the automation.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
The operating mode with "pulse function" activated can be selected by the dip 4.
6-1622601 REV.02
22/09/2021
dip
1
Function on opening
2
Function on closing
3
4
Pulse functioning
The automation operates under dead man mode on opening.
The automation operates under pulse mode on opening.
The automation operates under dead man under on closing.
The automation operates under pulse mode on closing.
ITA
Function
Working time
Dip-switch function table
ENG
FRA
ESP
DEU
POR
Dip OFF
Dead man
Impulse on opening
Dead man
Impulse on closing
Programmable
Open— close
Step by step functionGO)
Dip ON
Infinite
5 / 8