360 Yield 360 Y-DROP HAGIE DTS 2016 + Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сельскохозяйственное оборудование 360 Yield 360 Y-DROP HAGIE DTS 2016 +. 360 Yield 360 Y-DROP HAGIE DTS 2016 + 10 страниц.

Печатать страницу

INSTALL 360 Y-DROP

IV.

BOOM

Figure 12

Step 1

Assemble 5' boom sections (1) utilizing

8" boom connectors (2) and the supplied

hardware.

Hardware Bag CC

Step 2

Repeat Step 1 as needed in order to

assemble the entire 360 Y-DROP boom.

Step 3

Set the 360 Y-DROP boom assembly

onto boom bracket (3).

Repeat Steps 1 -3 for the remaining boom assemblies.

CAUTION: The 360 Y-DROP boom assembly may

weigh up to 150 lbs. (68 kg). Exercise caution and

enlist help for this process.

Figure 13

Step 4

In order to span the full length of the

center section 360 Y-DROP boom, you

will need to cut and drill one of the 5'

boom sections to 1' . Mount this 1' section

between two full 5' boom sections. Drill a

7/16" through hole centered 2" from the

outside edge.

Figures 14 and 15

Step 5

Install square U-bolt (1), the 5/16" extra

thick washers, and the 5/16" nuts over

the 360 Y-DROP boom (2).

Hardware Kit A

Step 6

Install stop bolt (3) at the both the front

and the rear of the extension tube.

Repeat for remaining stop bolts.

Hardware Kit B

Step 7

Install stainless steel set screw and

jam nut assembly (4). See Figure 12 for

detail. Repeat for the remaining mount

assemblies on the primary boom.

INSTRUCTIONS 360 Y-DROP

Figure 12

Figure 13

Figure 14

Figure 15

360YIELDCENTER.COM

HAGIE DTS 2016 +