Miele DDF 125 Инструкции по эксплуатации и установке - Страница 17

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Вентиляционная вытяжка Miele DDF 125. Miele DDF 125 28 страниц. External motor roof installation
Также для Miele DDF 125: Руководство по эксплуатации и установке (24 страниц), Руководство по установке (28 страниц)

ABLG 202

1) Suction side

The ABLG 202 external motor is

designed for installation inside the

house.

Possible locations:

– In the attic or ceiling space

– In an adjoining room, e.g. a pantry or

garage

– In the kitchen, if sufficient insulation

is used.

It can installed in a vertical or horizontal

position. If installing vertically, please

refer to the installation instructions on

the next page.

The external motor is connected to the

cooker hood by means of a control

cable, and is operated by the control

panel on the cooker hood.

Please refer to the operating and

installation instructions for the

cooker hood before installing the

external motor and ducting.

^ When positioning the external motor,

you must pay particular attention to

the direction of the ducting.

^ Mark the positions for the four motor

base plate holes on the installation

surface.

^ Place the motor to one side.

^ Drill four C 8 mm holes in the

positions marked to a depth of

40 mm.

^ Press S 8 plugs into the drill holes so

that they are flush.

^ Fit the installation mountings through

the base plate.

^ Secure the motor with the screws

supplied.

Installation