Miele KM 2355 Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Вентиляционная вытяжка Miele KM 2355. Miele KM 2355 21 страница. Flush-mounted gas cooktop
Также для Miele KM 2355: Технические характеристики (4 страниц)

Печатать страницу

IMPORTANT INSTALLATION SAFETY INSTRUCTIONS

Installation

The minimum distances given in

these Installation instructions are to

combustible surfaces, and must be

observed to ensure safe operation.

Failure to do so increases the risk of

fire.

The cabinetry and venting hood

should be installed first to prevent

damage to the cooktop.

Gas appliances should only be

installed in a well ventilated area.

The countertop must be bonded

with heat resistant (212°F/100°C)

adhesive to prevent distortion or

dissolving.

Any wall coverings must be heat

resistant as well.

This appliance must not be used in

a non-stationary location (e.g. on a

ship).

Deep fat fryers must not be installed

directly next to gas cooktops. Gas

flames can ignite splattering oil. A

distance of at least 11

should be maintained between these

two appliances.

The cooktop must not be installed

over a dishwasher, washer, dryer,

refrigerator or freezer. Heat radiated by

the cooktop may damage the

appliances.

Install the appliance so that the

power cord or gas piping does not

come into contact with any portion of

the cooktop which may become hot

during use.

" (300 mm)

The power cord and a flexible gas

connection line must be attached in

such a way that they are not in contact

with moving parts of kitchen elements

(e.g. a drawer) and are not subject to

mechanical stress.

The safety distances listed on the

following pages must be carefully

maintained.

Never use a sealant unless

expressly stipulated. The sealing tape

of the appliance ensures adequate

sealing to the countertop.

This appliance must be installed

with its own shut off valve and the

included gas pressure regulator.

Both the valve and the regulator

must be easily accessible to the

consumer after the appliance is

installed.

This appliance must be

disconnected from the gas supply

during any pressure testing of the

system performed in excess of ½

psi (3.5 kPa). This appliance must

be isolated at test pressures equal

to or less than ½ psi (3.5 kPa).

Any pipe connections must be

made using a thread sealant

approved for gas connections.

Failure to correctly install these

items could lead to a gas leak and

subsequent explosion.

In Massachusetts installation must

be performed by a licensed

plumber/gas fitter.