Miele TX2070 Инструкции по эксплуатации и установке - Страница 26
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Вентиляционная вытяжка Miele TX2070. Miele TX2070 44 страницы.
Cleaning and care
Cleaning the vapour plate and grease
filter in a dishwasher
Place the vapour plate and the filter
upright or slightly inclined in the lower
basket, with the short sides upright,
ensuring the spray arm is not ob-
structed.
Use a standard household dish-
washer detergent.
Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the cleaning agent
used, cleaning the filter in a dish-
washer can cause permanent discol-
ouration to internal surfaces of the fil-
ter. However, this will not affect the
functioning of the filter in any way.
After cleaning
After cleaning, leave the filter to dry
on an absorbent surface before repla-
cing it.
With the vapour plate and grease fil-
ter removed, clean off any residues of
oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
Push the grease filter back in as far
as it will go.
26
Hook the vapour plate into the bot-
tom of the housing, push it slightly to
the left and then raise it up towards
the appliance and click it into posi-
tion.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be re-set.
Press the Grease filter control for
approximately 3 seconds to reset the
operating hours counter.
The indicator lamp for the grease fil-
ter will go out.
If you want to clean the grease filter
before the operating hours counter
has reached its maximum:
Press the Grease filter control for
approx. 6 seconds.