Miele T 1526 Техническая информация - Страница 12

Просмотреть онлайн или скачать pdf Техническая информация для Сушилка Miele T 1526. Miele T 1526 42 страницы. Vented dryer
Также для Miele T 1526: Руководство по эксплуатации (28 страниц), Руководство по эксплуатации (28 страниц)

Technical Information

2.0

Installation

Do not drink the condensed water.

Keep the area around the air intake (toekick) and surrounding areas free from

lint, dust and dirt. This area should not be blocked, or it will prevent sufficient

intake of air and affect appliance operation.

Do not reach into the dryer while the drum is moving.

The appliance should be level to ensure proper operation.

A dryer can be placed on top of a Miele washer for a stacked installation. An

approved Miele stacking kit must be used.

2.1

120/240 (208) VAC, 60Hz, 15A breaker

Dryer is equipped with a 4-wire power cord with a NEMA 14-30 plug for

connection to a NEMA 14-30 receptacle.

Note:

If you do not have a dedicated 15-amp circuit for this appliance, but have a

NEMA 14-20 or NEMA 14-30, 240VAC, 30-amp outlet, you may be able to

use a Miele Easy Installation Kit to simplify the electrical connection. For

further information, refer to the Electrical information pages in the

installation manual.

Do not cut off or remove the plug from the power cord.

2.2

Plumbing Information – Condenser Models

On condenser dryers, the option exists to have the condensed water exit the

appliance via a drain line. A suitable drain system (i.e. stand pipe) is required for

this option.

Maximum drain hose length: 10 feet

Maximum drain height: 4 feet

All condenser dryers come supplied with the following accessories to add the

drain line option. Please do not discard the parts during an installation as they

may be used at a later date.

6-foot drain hose

Hose clamp

Hose elbow

T 15xx Dryers