HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Установка драйверов - Страница 8

8) Open the c:\xpcd\i386\txtsetup.sif file in Notepad.

9) Go to the end of the file. There will be several blank lines.

10) Move the cursor up a few lines. This is necessary because there is a hidden marker at the end

of the file.

11)

Add the following lines. For the HardwareIdsDatabase, multiple device IDs can be added

here using any of the SATA Device IDs obtained from the section of this document titled "How

to Obtain SATA Device IDs". Simply replace the [SATA Device IDs] with the Device ID you

received from the system. Only one is needed, but multiple IDs can be inserted for additional

support of multiple SATA Device Controllers.

[SourceDisksFiles]

iastor.sys= 1,,,,,,4_,4,1,,,1,4

iaAHCI.cat=1,,,,,,,20,0,0

iaAHCI.inf=1,,,,,,,20,0,0

iaSTOR.cat=1,,,,,,,20,0,0

iaSTOR.inf=1,,,,,,,20,0,0

[HardwareIdsDatabase]

[SATA Device ID1] = "iaStor"

[SATA Device ID2] = "iaStor"

[SATA Device ID3] = "iaStor"

[SATA Device ID4] = "iaStor"

[SATA Device ID...] = "iaStor"

[SCSI.Load]

iaStor = iaStor.sys,4

[SCSI]

iaStor = "Intel(R) 82801 SATA RAID/AHCI Controller

(ICH5,6,7)"

12) Save the file and exit notepad.

13) Extract the files from c:\xpcd\support\tools\deploy.cab to c:\deploytools

14) Create a new winnt.sif:

a. Execute setupmgr.exe (extracted from deploy.cab in step 13).

b. Select "Create new answer file"

c. Select "Unattended Setup"

d. Select "Windows XP Pro"

e. Select "User Interaction desired"

Select "Set up from a CD"

g. Enter desired information under each of the following Settings sections

h. Save the file as c:\xpcd\i386\winnt.sif

15) Open the c:\xpcd\i386\winnt.sif in notepad

16) Under the section [Unattended], add the following lines:

OemPreinstall=yes

OemPnPDriversPath=drivers\sata

DriverSigningPolicy = Ignore

17) Save winnt.sif and close notepad

Page 8