Miele T 8903 C Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сушилка Miele T 8903 C. Miele T 8903 C 48 страниц. Condenser tumble dryer
Печатать страницу
D Select a programme
^ Turn the programme selector to the
required programme.
Tip: You can individually modify the
residual moisture or programme
selection for some programmes (see
"Programmable functions").
E Start the programme
^ Press the Start button.
The indicator light for the Start button
will go from flashing to constantly
lighting up.
The heating phase begins.
Before the end of a programme
The heating phase is followed by a
cooling down phase (Cool air lights up).
The programme is not finished until the
cooling down phase has been
completed.
There is no cooling down phase with:
Woollens handcare, Smoothing.
F Remove the laundry when the
programme has finished
The Finish/Anti-crease indicator light
comes on.
How to dry correctly
After the programme has finished, the
drum will continue to rotate in a certain
rhythm, depending on the selected
programme. This "Anti-crease rhythm"
helps to prevent creasing if the laundry
is not removed immediately after the
end of a programme (not with Woollens
handcare).
Duration: changeable, see
"Programmable functions".
^ Press the Door button.
^ Open the door.
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
^ Switch the dryer off by pressing the
On/Off button jk.
^ Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container (unless the dryer has been
connected for external drainage).
^ Check the condendser unit
intermittently and clean if necessary
(see "Cleaning and care").
Using the Cottons Normal +
programme is recommended for a
mixed cotton load and is the
programme used in energy
consumption tests to AS/NZS 2442
(Refer to www.energyrating.gov.au
website for consumption data).
13