The approval of this modem is INVALIDATED if the apparatus is subject to
modification in any material way not authorised by the BABT or if it is used with
or connected to external software that has not been formally accepted by BABT.
Storage of Numbers
It is advisable to check the telephone numbers stored in your modem immediately
after programming.
In order to prevent the misdirection of class and network interference, please
ensure that all manually programmed telephone numbers are correctly entered.
The number you enter to dial may optionally contain a PAUSE character
(a comma) to allow this modem to operate with a PABX. Each comma gives
a two-second delay.
WARNING: When using this device, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury
to persons, including the following:
Do not use this product near water, for example, near a bathtub,
■
wash bowl, kitchen sink or laundry tub, in a wet basement, or near
a swimming pool.
Avoid using this product during an electrical storm. There may be a
■
remote risk of electric shock from lightning.
Do not use this product to report a gas leak in the vicinity of the leak.
■
Always disconnect the modem cable before opening the equipment
■
enclosure or touching an uninsulated modem cable, plug, socket, or
internal components.
If this product was not provided with a telephone cable, use only
■
No. 26 AWG or larger telecommunication cable in order to reduce
the risk of fire.
Do not plug a modem or telephone cable into the Network Interface
■
Card (NIC) receptacle.
Additional Safety Information
This product has not been evaluated for connection to an "IT" power system
(an AC distribution system with no direct connection to earth, according to
IEC 60950).
AC Power Safety Warning
Proper Electrical Connection (Norway and Sweden only)
Advarsel: Apparatet må kun tilkoples jordet stikkontakt.
Varning! Apparaten skall anslutas till jordat uttag när den ansluts
till ett nätverk.
SAVE THESE INSTRUCTIONS
Печатать страницу