Miele S 240 series Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пылесос Miele S 240 series. Miele S 240 series 32 страницы.
Также для Miele S 240 series: Руководство по эксплуатации (32 страниц)
This appliance meets statutory
safety requirements. Inappropriate
use can however lead to personal
injury and damage to property.
Read the operating instructions
carefully before starting to use this
appliance. They give important infor-
mation on the safety, operation and
care of the appliance. This way you
will prevent the risk of accident or
damage to the appliance. Please
keep these operating instructions in
a safe place for reference, and pass
them on to any future users.
This vacuum cleaner must only be
used in a domestic household situ-
ation to vacuum
not use on people or animals.
Any other usage is at the owner's risk
and could be dangerous.
The manufacturer cannot be held liable
for damage resulting from improper or
incorrect use of the appliance.
Do not let small children play with
the appliance or operate it. Please
supervise its use by older children and
the elderly or infirm.
6
floor surfaces. Do
A damaged vacuum cleaner can
be dangerous. Check the packag-
ing, the vacuum cleaner and accesso-
ries for any signs of damage. Do not
use a damaged appliance.
Ensure that the connection data on
the data plate (voltage and fre-
quency) match the mains electricity
supply. It is essential that they match to
avoid damage to the appliance.
It is important to switch the vacuum
cleaner off before changing over
accessories and floor heads, especially
a Turbo- or Electrobrush.
To avoid the risk of damage, do not
use the vacuum cleaner without the
dustbag, dust compartment filter and
exhaust filter in place.
If a dustbag is not inserted, the
dust compartment cover does not
normally close. Do not force it.
There is a metal inlay underneath
the handle, which is designed to
protect the user from electrostatic dis-
charges. Please make sure that you
keep your hand in constant contact with
this metal strip during vacuuming. This
way any build-up of electrostatic
charge will be rendered ineffective.