Miele F 1901 SF Инструкции по эксплуатации и установке - Страница 24

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Холодильник Miele F 1901 SF. Miele F 1901 SF 26 страниц. Sf freezers (36 inch)
Также для Miele F 1901 SF: Руководство по установке (24 страниц), Руководство по измерению (3 страниц), Технические характеристики (3 страниц)

Miele F 1901 SF Инструкции по эксплуатации и установке
,
Avoid the risk of electrical
shock
- Plug into a grounded 3-prong
outlet.
- Do not move the ground plug.
- Do not use an adapter.
- Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
Improper connection of the
equipment grounding conductor
may result in electric shock. If you
are in any doubt as to whether the
appliance has been properly
grounded, have the appliance
checked by a qualified electrician or
service technician.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer will
not be held responsible for damage
or injury arising from unauthorized
work.
Before installing the appliance,
verify that the voltage, load and
circuit rating information found on
the data plate match the household
electrical supply.
If there are any questions regarding the
electrical connection of this appliance
to the power supply, please consult a
licensed electrician or call the Miele
Technical Service.
U1-800-999-1360
V1-800-565-6435

Electrical connection

The appliance comes with a UL-listed,
3-wire power supply cord.
The appliance requires a 3-wire
receptacle.
The receptacle must be installed by a
licensed electrician only.
In the case of side-by-side installations,
a separate outlet must be used for each
appliance. Ideally, the power outlet
should be next to the appliance and
easily accessible. Do not connect the
appliance to the power supply by an
extension cord. Extension cords do not
guarantee the required safety of the
appliance (danger of overheating).
If any changes are needed to the
household wiring or power supply, this
work must be performed by a qualified
electrician.
65