Miele K 12421 SD Руководство по эксплуатации и установке - Страница 41

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Холодильник Miele K 12421 SD. Miele K 12421 SD 48 страниц. Refrigerator with dynamic cooling

Печатать страницу

^ Take the door and guide the upper

door bearing bush onto upper hinge

pin k.

^ Pivot the door and place hinge pin e

into hinge plate d. Important. Turn

the hinge pin if necessary, so that the

tab is pointing to the inside of the

door and the notch to the outside.

The hinge pin will then click into

place.

^ With the help of another person,

carefully tip the appliance back and

tighten retaining screw c. Tighten it

using a suitable spanner.

^ Align the door with the appliance

housing again if necessary using the

long slots in the lower hinge plate.

Then tighten the screws.

^ Replace spacer pin p underneath

the right-hand side of the door.

Changing the door hinging

Refitting the handle

Please make sure you follow the

instructions below carefully when

you refit the handle. The door seal

will be damaged if the handle is

fitted incorrectly.

^ Loosely attach the handle to the

opposite side of the door with the two

front screws b.

Mounting plate c must be positioned

on the side of the door so that when the

door is closed it is flush with the side of

the appliance.

If this is not the case,

^ tighten both grub screws a with a

suitable allen key until mounting plate

c lines up correctly.

^ Then tighten all 4 screws b.

^ Slide the side section of handle d

into the guides on the mounting plate

until it clicks into place.