Miele KM 2054 Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Варочная панель Miele KM 2054. Miele KM 2054 44 страницы. Gas cooktops

Operation

The control is used to ignite the burner and to regulate the

strength of the flame.

ßThe gas supply is turned off

& Strong flame

/ Weak flame

The burners can only be switched on by pressing in the

appropriate control and turning it anti-clockwise, and

switched off by turning the control clockwise.

The following will cause damage to the appliance:

Switching on the burner without pressing the control

down,

Switching the burner on by turning the control

clockwise,

Switching the burner off by turning the control anti-

clockwise.

The manufacturer will not accept liability for any damage

resulting from incorrect operation.

Do not leave the appliance unattended whilst it is

being used.

^ The control for the burner required must be pressed in and

turned anti-clockwise to the large flame symbol to switch

on.

A spark is automatically produced on all burners when a

control knob is activated. This is completely normal and

does not indicate a fault with the appliance.

^ When the flame ignites, keep the control pressed in for

8-10 seconds, and then let it go.

^ If the flame goes out turn the control to "ß" and wait for at

least 1 minute before trying to ignite it again. If necessary

keep the control pressed in for longer.

^ If the burner does not ignite after a second attempt turn the

control back to "ß" and go to the "Problem solving guide" for

advice.