Miele KM 371 G Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Варочная панель Miele KM 371 G. Miele KM 371 G 32 страницы. Gas
Также для Miele KM 371 G: Руководство по эксплуатации (32 страниц), Руководство по эксплуатации (28 страниц), Руководство по эксплуатации (28 страниц), Руководство по эксплуатации (40 страниц)

Building in

Fit wall units and extractor hood

before fitting the hob, to avoid

damaging the appliance.

The veneer or laminate coating of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

Ideally the gas hob should be

installed with plenty of space on either

side. There may be a wall at the rear

and a tall unit or wall at one side. On

the other side, however, no unit or

divider should stand higher than the

hob (see illustrations).

This equipment is not designed for

maritime use or for use in mobile

installations such as caravans, aircraft

etc. However it may be suitable for

such usage, subject to a risk

assessment of the installation being

carried out by a suitably qualified

engineer.

Due to the heat radiated by the hob

and to allow cooking fumes to

dissipate, it is essential that a

minimum safety distance

150 mm is maintained between the

worktop cut-out and adjacent

furniture, e.g. a tall unit.

Safety instructions

recommended

not recommended

not allowed