Miele KM 406 Руководство по установке - Страница 13

Просмотреть онлайн или скачать pdf Руководство по установке для Варочная панель Miele KM 406. Miele KM 406 20 страниц. Gas cooktop
Также для Miele KM 406: Руководство по эксплуатации (20 страниц), Руководство по измерению (1 страниц), Руководство по установке (40 страниц), Руководство по эксплуатации (28 страниц), Руководство по эксплуатации (24 страниц), Руководство по эксплуатации (20 страниц), Руководство по установке (28 страниц), Руководство по установке (20 страниц), Руководство по установке (40 страниц)

Печатать страницу
Miele KM 406 Руководство по установке
This appliance must be electrically
grounded according to local or
national codes.
All electrical work should be
performed by a qualified electrician
in accordance with local codes and
the:
-
National Electrical Code
ANSI / NFPA No. 70
for the USA
or
-
Canadian Electrical Code Part I
for Canada
(CSA Standard C 22.1).
,
WARNING - Disconnect the
appliance from the main power
supply before installation or service.
To reduce the risk of electric shock,
make sure that the appliance is
properly grounded after installation.
Power supply
The automatic ignition requires that the
cooktop be connected to a 120 VAC,
60 Hz power supply. The supply line
should be protected by a 15 A breaker.
Actual power consumption (during
ignition only) is 25 W.
This appliance is equipped with a 4 ft.
(1.2 m) long power cord that is ready
for connection to the appropriate outlet.
Please place the power outlet so that it
is accessible after the appliance has
been installed in the countertop.

Electrical connection

This appliance is equipped with a
three-prong grounding plug to
prevent shock hazards. It should be
plugged directly into a properly
grounded outlet. Do not cut or
remove the grounding prong from
the plug. If the plug does not fit the
outlet, have the proper outlet
installed by a licensed electrician.
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an
effective grounding system. It is
imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of
the house checked by a qualified
electrician.
The manufacturer cannot be held
responsible for damages caused by
the lack, or inadequacy, of an
effective grounding system.
Note to the installer
Please leave these instructions with the
consumer or the appliance.
13