Miele KM 6092 Инструкции по эксплуатации и установке - Страница 35
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Варочная панель Miele KM 6092. Miele KM 6092 48 страниц. Ceramic cooktops with induction
Печатать страницу
Problem
Auto Heat-up is turned
on, but the food does
not start cooking.
A noise can be heard
after the appliance is
turned off.
is flashing in the
display of one or
more cooking
zones.
The rotary control is not
at "0", a power level has
been set for the
cooking zone. The
cooking zone is not
heating up.
appears in the display
or flashes alternately
with .
flashes in the
display
alternating with
numbers.
Possible cause and remedy
Large amounts of food are being heated.
Start cooking at the highest power level, then
reduce the power level manually.
Pan is not conducting heat properly.
Use a different pan that is able to better conduct
heat on an induction cooktop.
The fan will continue running until the appliance has
cooled down. It will then turn itself off automatically.
The rotary control for the cooking zone has been
turned to the point of resistance clockwise or anti-
clockwise for longer than 30 seconds.
Turn the rotary control to 0. If the fault message
does not go out, there could be a technical fault.
Contact Miele Technical Service.
There was an interruption to the power supply during
operation.
The cooking zone was switched on more than 3
minutes ago without a suitable pan being placed on it.
The maximum operating time for the cooking zone
has been exceeded.
Turn the rotary control to 0.
The cooking zone can now be used again.
There is a fault with the electronics.
Interrupt the power supply to the cooktop for
approx. 1 minute. If the problem persists after
power is restored, please contact Miele Service.
Problem solving guide
35