DIAKAT RK-10 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пила DIAKAT RK-10. DIAKAT RK-10 9 страниц. Roofing saw
Печатать страницуRK10S S S S
RK10
RK10
RK10
Roofing saw
1.7. Safety instruction for work with RK-10 Roofing Saw
When working with the machine the following instructions must be complied with:
1. It is prohibited to work with the machine with out the tool cover.
2. Person except the operator is permitted within the danger perimeter of the machine.
3 Start the machine only in the safety, non working mode. Ensure that the tool is a safe
distance off the ground.
4. Always change the tool with the machine in secure position with the engine switched
off.
5. Observe all general rules of safe work.
TECHNICAL DATA AND DESCRIPTION OF THE MACHINE
2.
2.1. Description of the machine
The RK 10 Roofing Saw is primarily designed for cutting bituminous roofing materials
with two or four TC tips dia. 300 mm blade.
RK 10 Roofing Saw (further only saw) consist of an undercarriage, driving head with two
bearings, drive shaft, pulley, two flanges and M20 fastening nut. On the undercarriage is
mounted an engine with pulley two V belts and a cover. The engine mounting bolts are in
slots in the undercarriage to facilitate belts tightening. The swivelling tool cover with a
front traversing wheel is also mounted on to the undercarriage. The position of the tool
secured by a mechanical brace on a steel rod with threaded control close to the
handlebars. The handlebars are mounted on four flexible bocks.
2.2. Technical specifications
Dimensions (l x h x w)
Weight
Tool diameter
Main spindle rpm.
Engine
Engine rpm.
Max. power
Type
Fuel
Level of acoustic power A L
900 x 500 x 950 mm
51 kg
300 mm
3000 rpm.
HONDA 1 cyl, 4-stroke
3600 ot.min
4.0 kW (at 3600 rpm.)
GX 160
Natural 95
108 dB
wag
-1
Page 5 of 8