DiaLFonZo-Copter V-Tail Hunter 400 Руководство по сборке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по сборке для Дроны DiaLFonZo-Copter V-Tail Hunter 400. DiaLFonZo-Copter V-Tail Hunter 400 8 страниц. Frame referance
Печатать страницу
DiaLFonZo V-Tail
Please follow the visual instructions carefully to make sure no mistakes are made.
ASSEMBLY of the Landing Legs (Build three of these)
The Landing legs are all identical and will be built the same way.
They are made up of four main G10 parts and associated hardware.
Note: You will be required to use four
and four
for
5/16" 4-40 hex screws
4-40 nylon lock nuts
each of the three assemblies.
ASSEMBLY of the Two Front Arms (Build two of these)
The Two Front Arms are all identical and will be built the same way.
They are made up of two main G10 parts and associated hardware.
+ One Pre made landing legs from the previous step.
Note:
As the
in the landing leg is designed to pull the two landing tips closer
0.5" standoff
together, you may want to remove the
from the
to make
1/4" 4-40 hex screws
0.5" standoffs
installation into the frame much easier.